- Brand : Tripp Lite
- Product name : APS2012
- Product code : APS2012
- GTIN (EAN/UPC) : 0037332090270
- Category : Power Adapters & Inverters
- Data-sheet quality : created/standardized by Icecat
- Product views : 85385
- Info modified on : 19 Feb 2024 22:59:37
- Warranty: : 1 year
-
Long product name Tripp Lite APS2012 power adapter/inverter 2000 W Black
:
PowerVerter APS - 2000W
-
Tripp Lite APS2012 power adapter/inverter 2000 W Black
:
Tripp Lite's APS2012 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to 2000 watts of continuous 120V AC power from any 12V battery or automotive DC source. OverPower TM inverter output feature temporarily provides up to 150% of the continuous output for 1-60 minutes, and DoubleBoost TM inverter output feature delivers up to 200% of the continuous output for up to 10 seconds, providing the extra power needed to cold start heavy-duty tools and motorized equipment. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 25/100 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional APSRM4 wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information (APSRM4 sold separate). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel/SLA battery types and selectable line to battery power transfer voltages.
- APS2012 serves as an automotive or stationary DC-to-AC inverter with automatic line-to-battery transfer and integrated battery charger.
- Supports 120V AC output from a 120V AC line power source or 12V DC battery source.
- Supports 120V AC output from a 120V AC 16.6 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for equipment compatible with a one cycle transfer time.
- 2000 watts continuous AC output in inverter mode, 2400 watts continuous AC output in AC mode.
- Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds.
- OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions. (For best results, utilize OverPower usage for as short of a duration as possible, ensure battery bank and cabling is able to provide full nominal DC voltage under load and allow inverter/charger to fully cool before and after OverPower usage.)
- 3-stage, selectable 25/100 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging.
- Protected hardwire bolt-down input lugs safely accept heavy gauge input wiring from attached battery bank.
- Protected hardwire output passes 120V line power or inverter output through to connected equipment.
- Reliability enhanced large-transformer design with secure mounting flanges and protected DC wiring terminals.
- Moisture-resistant construction enables vehicular or marine operation in high humidity environments.
- 3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings.
- Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status.
- Set of 4 configuration dip switches support wet/gel battery charging profiles, adjustable 135/145V high voltage auto transfer during overvoltages and selectable 75/85/95/105V AC low voltage auto transfer during brownouts.
- Set of 4 additional configuration dip switches support 4 levels of charger limiting relative to output load size, a battery equalization program and battery charger low/high settings.
- Resettable 25A charger AC input breaker and resettable 20A AC output breaker and automatic 2 speed cooling fan protect the inverter from load and temperature related failures.
- Grounding lug properly connects the inverter/charger system to earth ground or vehicle grounding system.
- Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop.
- Front panel remote control connector enables remote off/on switching (requires APSRM4 switch. accessory). Optional APSRM4 accessory also includes user configurable jacks to support inverter shutoff or startup as a vehicle ignition is engaged.
- Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change. -
Short summary description Tripp Lite APS2012 power adapter/inverter 2000 W Black
:
Tripp Lite APS2012, 2000 W, 120 V, 25 A, China, Black, 215.9 mm
-
Long summary description Tripp Lite APS2012 power adapter/inverter 2000 W Black
:
Tripp Lite APS2012. Output power: 2000 W, Output voltage: 120 V, Output current: 25 A. Product colour: Black. Width: 215.9 mm, Depth: 412.8 mm, Height: 184.2 mm. Package width: 365.8 mm, Package depth: 535.9 mm, Package height: 325.1 mm. Master (outer) case width: 365.8 mm, Master (outer) case length: 535.9 mm, Master (outer) case height: 325.1 mm
Features | |
---|---|
Output power | 2000 W |
Output voltage | 120 V |
Output current | 25 A |
Country of origin | China |
Design | |
---|---|
Product colour | Black |
Weight & dimensions | |
---|---|
Width | 215.9 mm |
Depth | 412.8 mm |
Height | 184.2 mm |
Weight | 18.1 kg |
Packaging data | |
---|---|
Package width | 365.8 mm |
Package depth | 535.9 mm |
Packaging data | |
---|---|
Package height | 325.1 mm |
Package weight | 19.5 kg |
Logistics data | |
---|---|
Harmonized System (HS) code | 8504.40.9570 |
Master (outer) case width | 365.8 mm |
Master (outer) case length | 535.9 mm |
Master (outer) case height | 325.1 mm |
Master (outer) case gross weight | 19.5 kg |
Products per master (outer) case | 1 pc(s) |
Other features | |
---|---|
Dimensions (WxDxH) | 215.9 x 412.8 x 184.2 mm |
Package dimensions (W x D x H) | 381 x 546.1 x 336.6 mm (15 x 21.5 x 13.2") |
Country | Distributor |
---|---|
|
1 distributor(s) |