Stitch S500 64-in Printer
Print an entire shift unattended or overnight with the largest media rolls[2] and large supplies. Reduce downtime and service costs with user-replaceable printheads. Efficiently manage your fleet and remotely monitor printer status.
Dynamic security enabled printer Certain HP printers are intended to work only with cartridges that have a new or reused HP chip or electronic circuitry. These printers use dynamic security measures to block cartridges using a non-HP chip or electronic circuitry. Periodic firmware updates will maintain the effectiveness of these measures and block cartridges that previously worked. Reused HP chips and electronic circuitry enable the use of reused, remanufactured, and refilled cartridges.
HP Stitch S500 64-in Printer, Dye-sublimation, 1200 x 1200 DPI, Black, Cyan, Magenta, Yellow, 1625 x 1220 mm, 0.5 mm, Gigabit Ethernet
HP Stitch S500 64-in Printer. Print technology: Dye-sublimation, Maximum resolution: 1200 x 1200 DPI, Printing colors: Black, Cyan, Magenta, Yellow. Maximum print size: 1625 x 1220 mm, Media thickness: 0.5 mm. Ethernet interface type: Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s. Sound pressure level (printing): 73 dB, Certification: WEEE; EU RoHS; RoHS Ukraine; RoHS Turkey; REACH; EPEAT Bronze; OSHA; CE, HP segment: Home. Power consumption (standby): 80 W, Power consumption (typical): 1000 W
[2] Compared to alternative 64-inch dye-sublimation based textile printers available as of June, 2020. Largest rolls up to 121 lb (55 kg). The HP Stitch S Printer series provides HP SmartColor tools and a built-in spectrophotometer for color consistency. Front media loading saves 50% floor space.
Technical specification disclaimers
The color variation inside a printed job has been measured at 6-pass mode on transfer media and also in direct-to-fabric situations within this limit: maximum color difference (95% of colors) ≤ 1.5 dE2000. Reflective measurements on a 943 color target under CIE standard illuminant D50, and according to the standard CIEDE2000 as per CIE Draft Standard DS 014-6/E:2012. 5% of colors may experience variations above 1.5 dE2000. Backlit substrates measured in transmission mode may yield different results. Results are dependent on sublimation process variability.
Papers are hygroscopic materials. They can absorb or lose moisture depending on external humidity conditions. A low level of substrate’s moisture and external relative humidity is always recommended when printing on paper based materials. Recommended external relative humidity is between 25% to 50%.